Need help? Call us today on
01904 737095
or email the team directly at:
sales@yorkshireprofiles.co.uk
We were recently asked to manufacture a one off small disk for a University project which was quite challenging for our laser. The main problem was that it was to be made out of thin mild steel. The disk had to have very narrow slots put in leaving only 0.2mm of material between each slot. […]
This project was to fully fabricate a stainless steel gantry for the food industry. This stainless steel fabrication was designed by one of our clients and fully fabricated by ourselves to their specifications. First the stainless steel box sections were cut to length and welded to create the frame. The facia plates were nearly 4 […]
Capturing the moment when a 4Kw laser pierces mild steel is always spectacular. Capturing the moment the laser piercing steel always makes for good pictures. A 4Kw laser can very quickly pierce through mild steel. Close up of our “eco pierce” on 10mm thick mild steel.
We understand that sometimes a drawing isn’t available and all you have is a part you require to be replicated. This is not a problem, our team can take the measurements off a sample you can provide to us and we can draw it up for you. We can then make any adjustments to the […]
This part was cut using only a single line. The heat from the laser cutting didn’t seem to affect the quality despite it being a lot of cutting in a 10mm mild steel plate. The narrowest part is only 1mm. This sample was manufactured using only 1 cut.
